Quick Start
Get your ANX dev module powered up and running your first application in minutes.
Dev Module
Explore the hardware capabilities, pinout, and peripheral interfaces of the ANX dev module.
OS Firmware
Learn how to flash, configure, and update the ANX OS firmware on your device.
Example Applications
Explore ready-to-run examples — from LED blink to sensor data and wireless connectivity.
Get started in four steps
1
Set up your hardware
Connect your ANX dev module to your computer via USB and verify the connection. See the Hardware Overview for supported boards.
2
Install the ANX toolchain
Install the ANX CLI and SDK to flash firmware and compile example applications. Follow the Quick Start guide for your OS.
3
Flash the OS firmware
Use the ANX CLI to flash the latest OS firmware image onto your dev module. See the Flashing Guide for step-by-step instructions.
4
Run your first example
Build and deploy the Blinky example to verify your setup, then explore the full example library.
Explore by topic
Pinout Reference
GPIO, I2C, SPI, and UART pin assignments for the ANX dev module.
OTA Updates
Update firmware wirelessly without a physical connection.
SDK Reference
Complete reference for the ANX SDK — initialization, GPIO, and communication APIs.
Connectivity Example
Connect your device to Wi-Fi and publish sensor readings to the cloud.
Troubleshooting
Diagnose common issues with flashing, connectivity, and peripheral setup.
FAQ
Answers to frequently asked questions about ANX Labs products.